V-Guard Features Hardware specifications V-Guard Card 1 V-Guard products DR001 : 1 Channel video. 2 Video signal Composite signal. 3 Video in RCA (VG1C) or BNC jack (VG4C & VG2AV) 4 Audio in VG1C & VG4C (Sound card MIC in) or VG2AV - (BNC jack* 2) 5 Video High Resolution (NTSC) 640x480 Pixel 320x240 Pixel 240x180 Pixel 160x120 Pixel Video High Resolution (PAL) 640x480 Pixel 352x288 Pixel 256x192 Pixel 176x144 Pixel 6 Recording speed MAX. 30 fps (NTSC) 25 fps (PAL) 7 Monitoring speed MAX. 30 fps (NTSC) 25 fps (PAL) 8 Multi-card capability 4/8/12/16 port: optional (VG1C, VG4C, VG2AV or combination. 9 Average image compression rate Dynamic compression rate = 40:1 ~ 240:1, Max. 2400:1 (Depends on the percentage of the image change or motion). 10 Motion detection Triggered recording and triggered alarm. 11 Image compression Technology SMICT (Super Motion Image Compression Technology): Image compression by DSP (Digital Signal Processor) IC. Background and foreground separation technology. 12 Watch dog Automatically restart when the system fails. (Need CH 8I8O card or VG2AV card). Software Functions 5.0 BETA Software 1 Recording/ Monitoring mode Normal recording mode, recycle recording mode, program recording mode (Schedule recording per each camera.) 2 Auto scan Automatic enlargement of each camera image. 3 Recording time Adjustable timing. (10 ~ 60 minutes for each file). 4 Recycle recording Recycle recording when the HD is full. 5 Alarm function Motion image trigger alarm, sensor input trigger alarm, video lost trigger alarm. 6 Motion image sensitivity Automatically record images at remote site based on motion detection. 7 Multi-remote function Remote the other hosts or by the other hosts at the same time. Remote through LAN, Internet, Intranet and PSTN. 8 Multi-masked area Unlimited mask area for each camera. 9 Local alarm Alarm schedule, play alarm sound, change recording speed, snapshot and output device control